ELEGRP Matte White Single Pole Occupancy Motion Sensor Light Switch, Need Neutral Wire, 120° Sensor Coverage PIR Infrared Motion Activated, for CFL/LED/MLV/INC/HAL/Fan, UL,1 Pack

Description

The ELEGRP motion sensor switch uses passive infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. If the sensor detects human motion before the TIME delay elapses, the sensor will re-clock for another TIME setting cycle before it automatically turns off the loads. If the sensor switch is kept being triggered by human motions, it’ll keep the light on until time delay elapses and no human motion is being detected during this period, or manually switched off. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ———————————————————————————————————————————————————————————————————— Timeout* *"Timeout" is the delay before light turns off after the room is empty. (0) 30 seconds (1) 1 minute (2) 5 minutes (3) 15 minutes (4) 30 minutes ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ PIR Sensitivity (0) Motion Sensor Off Manual-On/Manual-Off. (L) Motion Sensitivity Low (H) Motion Sensitivity High ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Ambient Light Sensor Mode (0) Vac(Vacancy Mode) Manual-On/Auto-Off. (1) AL-Low (Ambient Light Low) Auto-Off/Auto-On when Ambient Light is dark. (2) AL-High (Ambient Light High) Auto-Off/Auto-On when Ambient Light is bright. (3) AL-OFF (Ambient Light Sensor Off/Occupancy Mode) Auto-On and Auto-Off regardless of ambient Light level. (4) AL-Custom (Ambient Light Custom Settings) Auto-Off/Auto-On when Ambient Light level is lower than the level set by customer. This motion sensor switch provides an adjustable 120-degree field of view with optional adjustments for sensitivity, ambient light override, and delayed off time. The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for the porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The inside LED indicator will flash when the sensor detects human motions. Install the sensor switch about 4 feet from the floor to get a better experience. Hot objects or moving air currents can affect the performance of the sensing switch. The sensing switch requires an unobstructed view of room occupants to detect motion. ————————————————————————————————————————————————————————————————————— 1. Q: My house does not have the neutral (white) wire or only have one neutral (white) wire, can I use the device? A: No! This device will not function if there is no white (Neutral) wire or only one white wire in the wall box. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2. Q: Why LED Indicator does not flash or light does not turn on automatically when power has been restored? A: There may be 2 reasons: 1): Ensure there are Neutral (white) wires in wall box and they had been connected with white wire from sensor switch. 2): Ensure Line (usually Black) wire in wall box has been connected with Black wire from sensor switch and Load (usually Black) wire in wall box has been connected with red wire from sensor switch. Try to swap two black wiresif the symptom still exists. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 3. Q: Why the Lights do not turn on when space is occupied? A: There may be 3 reasons: 1) Ensure PIR Sensitivity is not set to Motion Sensor Off (“0”) position. 2) Ensure Ambient Light Sensor Mode is not set to Vacancy (“0”) position. 3) Ambient Light Sensor Mode may be set to “AL- Low”, which will not turn on the light if there is enough natural light in the room. Set Sensor Mode to AL-OFF mode. ———————————————————————————————————————————————————————————————————

Key Features

• •Easy to install: Neutral (White) Wire is required. Ultra slim profile, easily fits in electrical box and wall plate.
• •Universal Compatibility: Works with 200W LED/CFL, 500W MLV and 500W INC/HAL. 5A for Ballast(120V), 1/6HP Fan(4.4A 120V).
• •Modern Design: Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• •Single Pole Control: Can be used as single-pole control. Not suitable for 3 way or multiple way circuit. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home.
• •High Quality: Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.