Go Kart Clutch for 2-6.5HP Engine 3/4" Bore 12T with #35 Chain Centrifugal Clutch Fit For Predator 212cc,Honda GC160 GC190 GX120,Go Kart, Minibike, Fun Kart 19.05mm

Description

Clutch Bore: 3/4" Clutch Diameter: 107 mm Clutch Height: 55 mm Engagement Speed: 2300±300 RPM Sprocket: 12 teeth with 4 Feet #35 chain Recommended Engine: 2 HP - 6.5 HP, 3/4" shaft with flat key Chain: Length 130 liks,Fixed Pitch 9.525mm Before installing the clutch, lubricating oil needs to be dripped into a specific position to ensure unobstructed rotation Attention should be paid during the first use after installation: perform 3-5 break ins. If the speed is not enough, the clutch internal swing block (clutch shoes) will slip and smoke due to insufficient contact area caused by friction Correct process: 1. Maintain sufficient speed, run without load until the clutch engages for the first time, hold for 10 seconds, then turn off the engine for cooling 2. Gradually increase the load 3 times, with the speed ranging from 0 to full speed, and cool down every 2 minutes

Key Features

• •【12 Tooth Centrifugal Clutch】: Fit for 3/4"(19.05mm) Bore 12 Tooth Centrifugal Clutch for 4 Feet 35 Chain Common clutch for 2-6.5 HP engines, Engagement Speed 2300±300 PRM. The product fits for 3/4"(19.05mm) bore engines, not for 0.787"(20mm)! The chain fixed pitch is 9.525mm.
• •【Compatible with】: Fit for 2 - 6.5hp Honda Engines GC160, GC190, GX120, GX140, GX160, GX200. Fit for Tecumseh Engines 2-6.5 HP with 3/4" Shaft. For Briggs Stratton and 2-6.5 HP with 3/4" Shaft. For Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc. Fit for Go Kart, Minibike and Fun Kart; It also fit for any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-6.5HP motors in all brands.
• •【Package Included】: 1 x 12 Tooth Centrifugal Clutch + 1 x 4 Feet #35 Chain(130 Links) + 1 x Connecting Link + 2 x Set Screws. If the chain is too long, you could shorten it to a suitable length by yourself.
• •【Installation Tips】: Before installation, you need to drip a circle of lubricant above the circlip and wait for it to seep in, then rotate the clutch and turn it without any obstruction.
• •【First-time usage precautions】: Attention should be paid during the first use after installation: perform 3-5 break ins. If the speed is not enough, the clutch internal swing block (clutch shoes) will slip and smoke due to insufficient contact area caused by friction.(Please refer to the product details for the operation process)